How to remove tape residue from stainless steel refrigerator

The most effective way to remove adhesive left from film, packing tape, stickers, tags or labels on a new appliance and ensure no damage is done to the finish of the product is to apply one of the following:

• Household Liquid Dishwashing Detergent

• Mineral Oil

• Cooking Oil

• Goo Gone®

Apply any of these products using a soft, clean cloth and allow it to soak on the film, packing tape, sticker, tag or label. After soaking for a while, wipe it clean with a soft, dry cloth. Do not use a plastic pad or the equivalent on the appliance. Wipe the appliance dry and then apply polish to thoroughly clean and protect the surface.

Precautions:

• Do not allow the mineral oil, cooking oil, or Goo Gone® to come in contact with any plastic parts, especially the inner liner of a refrigerator. These items will destroy the plastic parts.

• Do not use Goo Gone® on stainless steel appliances unless you have tested it in an inconspicuous area first. In some cases, Goo Gone® can discolor or darken stainless steel.

You may also want to take a look at our Refrigerator - Removing Adhesive Residue article.

Home - Interior

Stainless steel appliances add a sleek, modern touch to your kitchen. Stainless steel is easy to maintain as long as it is cared for properly. Improper removal of stains, such as tape and tape residue, can lead to permanent scratches in the surface. Whether the tape on your stainless steel refrigerator comes from your little artist's drawings or from the delivery packing, it is important to remove it carefully to avoid damage.

Careful cleaning keeps your stainless steel refrigerator sleek and shiny.

Step 1

Pry a corner of the tape from the stainless steel refrigerator using your fingernail. Carefully peel as much of the tape as possible from the surface of the refrigerator. Scrape off any remaining tape with the edge of a credit card.

Step 2

Add a squirt of dish detergent to 1 cup of warm water in a bowl. Dip a dish cloth in the soap solution and squeeze out the excess moisture. Hold the soapy cloth over the tape residue for two to three minutes to soften the glue.

Step 3

Lift the cloth from the stainless steel refrigerator. Scrape the sticky tape residue with the edge of the credit card to remove as much as possible.

Step 4

Pour a quarter-sized amount of baby oil onto a clean dish cloth. Buff the stainless steel surface to soften and remove the remaining tape adhesive.

Step 5

Clean the surface of your refrigerator to remove oil residue by wiping it off with a cloth dampened with the dish detergent solution. Rinse the steel with plain water and dry with a clean kitchen towel.

Download Article

Download Article

Stainless steel is commonly used to construct and cover attractive kitchen appliances. If you own something made of stainless steel, you may already know that it is not exactly "stainless," but rather it picks up fingerprints and dirt more easily than other materials. Adhesives can be one of the hardest things to remove from stainless steel because scraping can damage the surface. Most adhesives are oil soluble, rather than water soluble, so water-based detergents do not work well. You can use cooking oil to remove the sticker, and vinegar to clean and polish the surface.

1. 1

   Pull off as much of the sticker as possible first. Before you use oil on the sticker, try to pull off as much of it as you can while it is still dry. Use your fingers to grasp the sticker along the edges and pull slowly and evenly upwards. Keep doing this until you cannot remove any more of the sticker.

   • If the sticker tears, grasp a new edge and try again.

2. 2

   Cover your work space in newspaper. You might not be able to do this in all circumstances, such as when trying to get a sticker off a fridge. But if you're working on a table or countertop, you'll want to make sure to prevent spillage, as oil can stain some surfaces.

   Advertisement

3. 3

   Place the stainless steel item flat on your work space, if possible. This will prevent the oil from spilling. Be careful when placing the surface flat. If it's an appliance, such as a toaster, you'll want to make sure it's not balanced on a protruding piece. If balanced in such a way, it might shift as you work and cause a spill.

4. 4

   Soak a portion of soft cloth in mineral, baby or olive oil. You don't want your material entirely soaked through, only enough to allow for a good spread of oil. You can use a cloth or a paper towel. If you use a paper towel, you'll want to fold it over a few times to ensure proper absorbency.

5. 5

   Dab or spray the oil on the sticker and let it sit. Make sure to cover the sticker thoroughly. It's especially important for the oil to seep in at the sticker's edges, where the adhesive is strongest. Allow the oil to sit on the sticker for a few minutes; no more than 5. The time should depend upon the size and strength of the sticker.[1]

   • Try spraying the sticker with a cooking spray, such as Pam.

   EXPERT TIP

   Michelle Driscoll is the Owner of Mulberry Maids based in northern Colorado. Driscoll received her Masters in Public Health from the Colorado School of Public Health in 2016.

   The oil method is best for painted metal surfaces. Take extra care with the painted metal depending on what kind of paint was used or how delicate it is. Letting the sticker soak for longer in oil will likely be a safe option. Using stronger methods, such as acetone or Goo-Gone products, may actually strip some of the paint off the metal.

6. 6

   Use the oiled cloth to wipe the adhesive off the surface. The seeping oil will have dislodged the sticker and its adhesive. You should now be able to rub the sticker away.[2] Follow the "grain" of the shine on the stainless steel. If you do not wipe with the grain, you can damage the surface's finish.

   • To find the grain, angle the steel away from you until it catches the light. You should then see vertical or horizontal lines shining. Follow them when you wipe.

7. 7

   Apply a new layer of oil if part of the adhesive remains. Wait for five minutes, then wipe again with the oil-covered cloth. This should only be needed for particularly tenacious stickers.

8. 8

   Wipe the oiled cloth across the entire stainless steel surface. The oil will allow you to easily remove fingerprints and other marks. Make sure to wipe with the grain, this will make the process much easier.

Advertisement

1. 1

   Use an open flame to heat up the sticker. If you're trying to remove a sticker from a light appliance, you can hold it over the flame, point the sticker at it. If you're using this method on something you can't easily lift, you'll need to bring your flame to the sticker. Run the flame over the sticker for about 30 seconds, making sure to heat up the whole sticker evenly.[3]

   • You can use a lighter, candle or match as your open flame.
   • Don't worry if you see black marks show up on your surface. As long as you haven't kept the flame in one place for too long, these should wipe away easily.

2. 2

   Peel off the sticker. After running the flame over the sticker, the tenacious glue should have melted and burned. You should now be able to peel the sticker off with your fingers without too much trouble.[4] If you're still having trouble, you might need to heat up the sticker some more.

3. 3

   Wipe away the residue with coconut oil. You only need a few drops of coconut oil, which you can spread onto the sticker residue with your finger. You can then use a paper towel or a soft cloth to wipe away the sticker gunk. It should come off easily.[5]

   • You can also use the coconut oil to wipe the black marks caused by the flame.

Advertisement

1. 1

   Dab rubbing alcohol onto a paper towel and lay it over the sticker. As the rubbing alcohol transfers from the paper towel to the sticker, it should start dissolving the glue. You should only have to wait a few minutes for this to happen.[6]

2. 2

   Scrub the sticker with the paper towel. After letting the alcohol work, most of the glue should have dissolved. Most, if not all of the sticker should come off easily. Scrub with the paper towel, and you should be able to lift most of the sticker.[7]

3. 3

   Scrape any remaining adhesive with your fingernail. Make sure to follow the grain of the stainless steel as you do so. Otherwise your surface could lose its luster, and even get scratched. Thanks to the alcohol, you should be able to simply scratch off whatever is left of the sticker.[8]

Advertisement

1. 1

   Soak the corner of a soft cloth in vinegar and wipe the surface. Make sure to wipe the entirety of the surface to remove the olive oil. You'll find that using distilled white vinegar will also work great for general cleaning and polishing of stainless steel.[9]

2. 2

   Wipe the surface with a cloth soaked with warm water. For this step, you should soak the cloth thoroughly. The water will allow you to clean any remaining oil or vinegar. Wipe with the “grain” of the stainless steel.

3. 3

   Wipe the surface completely with a dry cloth. Make sure not to leave any water on the stainless steel, as it may leave marks.

Advertisement

Add New Question

• Question

  How do you remove stickers from metal?

  Michelle Driscoll is the Owner of Mulberry Maids based in northern Colorado. Driscoll received her Masters in Public Health from the Colorado School of Public Health in 2016.

  Founder, Mulberry Maids

  Expert Answer

  There are a few methods to try - the simplest is to apply oil or rubbing alcohol to the sticker. First, peel off as much of the sticker as possible. Follow this by applying oil or alcohol to a clean cloth and dabbing at the sticker to allow the solution to soak the sticker. Let it sit, then wipe away the sticker with the cloth. Repeat this as necessary until the sticker and residue are gone.

• Question

  How do you remove stickers from stainless steel appliances?

  Michelle Driscoll is the Owner of Mulberry Maids based in northern Colorado. Driscoll received her Masters in Public Health from the Colorado School of Public Health in 2016.

  Founder, Mulberry Maids

  Expert Answer

  First, peel off as much of the sticker as possible. Follow this by applying oil or alcohol to a clean cloth, and dabbing at the sticker to allow the solution to soak the sticker. Let it sit, then wipe away the sticker with the cloth. Repeat this as necessary until the sticker and residue are gone. Once the sticker is off, you will want to polish the steel. An easy way to do this is to wipe down the steel with a cloth and vinegar, followed by a wipedown with warm water. Dry the steel afterward and always try to rub your cloth in the direction of the steel grain.

• Question

  How do you get stickers off painted metal?

  Michelle Driscoll is the Owner of Mulberry Maids based in northern Colorado. Driscoll received her Masters in Public Health from the Colorado School of Public Health in 2016.

  Founder, Mulberry Maids

  Expert Answer

  You can use the same process as with stainless steel, though extra care should be taken depending on what kind of paint was used or how delicate it is. Letting the sticker soak for longer in oil will likely be a safer option - using stronger methods such as acetone or Goo-Gone products may actually strip some of the paint of the metal.

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

Video

• Clean stainless steel often to prevent darkening or corrosion from dirt, salt, milk or acidic foods.

  As a small thank you, we’d like to offer you a $30 gift card (valid at GoNift.com). Use it to try out great new products and services nationwide without paying full price—wine, food delivery, clothing and more. Enjoy!

• Always wipe stainless steel dry to prevent mineral stains or spots on surfaces.

  As a small thank you, we’d like to offer you a $30 gift card (valid at GoNift.com). Use it to try out great new products and services nationwide without paying full price—wine, food delivery, clothing and more. Enjoy!

• You can use WD-40 to wipe the sticky residue away, following the same steps as you would with cooking oil.

  As a small thank you, we’d like to offer you a $30 gift card (valid at GoNift.com). Use it to try out great new products and services nationwide without paying full price—wine, food delivery, clothing and more. Enjoy!

Show More Tips

Advertisement

• Never use steel wool or abrasive sponges on stainless steel surfaces.

  As a small thank you, we’d like to offer you a $30 gift card (valid at GoNift.com). Use it to try out great new products and services nationwide without paying full price—wine, food delivery, clothing and more. Enjoy!

• Avoid using corrosive solutions on stainless steel, such as benzene cleaners or bleach.

  As a small thank you, we’d like to offer you a $30 gift card (valid at GoNift.com). Use it to try out great new products and services nationwide without paying full price—wine, food delivery, clothing and more. Enjoy!

Advertisement

References

About This Article

Article SummaryX

To remove a sticker from stainless steel, start by soaking a soft cloth in mineral, baby, or olive oil. Next, dab the oil directly on the sticker and let it sit for 5 minutes to dislodge the sticker from the surface. Then, wipe the area with the oil-soaked cloth to remove the sticker and any adhesive it left behind. Be sure to wipe with the grain to prevent surface damage! If you want to try something else, saturate the sticker with rubbing alcohol and let it soak for 5 minutes. Then, scrub the sticker with a paper towel to remove it from the surface. To learn more, like how to polish the steel after you remove the sticker, keep reading the article!

Did this summary help you?

Thanks to all authors for creating a page that has been read 512,548 times.

Reader Success Stories

• "Had a 12-quart stainless pot that had a huge sticker when we purchased it. Sticker came off, but glue remained...." more

Did this article help you?

Can you use Goo Gone on stainless steel fridge?

Does tape damage stainless steel?

How do you remove tape from a refrigerator door?

How do you remove 3M tape from a refrigerator?