More information
The Rheem Performance Plus 50 Gal. Medium 9-Year 4500/4500-Watt Elements Electric Water Heater with LED Indicator provides ample amount of hot water for households with 3 to 5 people. It provides more hot water and includes a self-cleaning feature for added convenience. Plus, it's perfect for replacement of an existing water heater and takes up less space than competing models.
Combination Gas Control, Status Light Troubleshooting
STATUS LIGHT
CODE
OFF
Constantly lit
One (1) blink every three
(3) seconds
Two (2) blinks every three
(3) seconds
Four (4) blinks every
three (3) seconds
Five (5) blinks every three
(3) seconds
Seven (7) blinks every
three (3) seconds
Eight (8) blinks every
three (3) seconds
STATUS LIGHT CODE
FLASHES STATUS
0
Control O /Pilot Out
1
Normal Operation
2
Thermopile Voltage Low
4
High Temperature Shutdown
5
Temperature Sensor Failure
7
Gas Control or Valve Failure
8
Flame Sense Error
If Pilot is lit, Status Light will brie y stay lit when Knob is turned to OFF.
CONDITION
Combination gas control turned off
Pilot not lit
Insufficient power supply (millivoltage) Check thermopile connector to the combination gas
Pilot recently extinguished and
Thermopile is cooling down
Temperature knob recently turned to
OFF position
Normal Operation
Temperature knob in pilot position and
pilot is lit
Low thermopile voltage however pilot
is lit
High water temperature limit tripped
Water temperature sensor failure
Combination gas control failure
False pilot flame signal
If the Status Light is not blinking, relight the
Pilot. To light Pilot, see Lighting Instructions
on water heater. If Status Light blinks more
than one ash every three seconds, see
Installation Instructions.
Example:
3 sec. pause
POTENTIAL SOLUTION(S)
Follow the operating instructions in the Use & Care
Manual to turn on the combination gas control
Follow the lighting instructions as detailed on this water
heater and it's Use & Care manual to light the pilot
control to ensure it is properly connected
Check thermopile wires for damage and replace if
needed
Inspect pilot assembly
Follow the lighting instructions as detailed on the water
heater and it's Use & Care manual to light the pilot
Set temperature knob on combination gas control to
desire setting
Check thermopile connector to the combination gas
control to enssure it is properly connected
Check thermopile wires for damage and replace it
needed
Inspect pilot assembly
Contact a qualified service technician.
See "IF YOU NEED SERVICE" on page 28
Contact a qualified service technician.
See "IF YOU NEED SERVICE" on page 28
Contact a qualified service technician.
See "IF YOU NEED SERVICE" on page 28
Contact a qualified service technician.
See "IF YOU NEED SERVICE" on page 28
25
The energy efficient PERFORMANCE PLATINUM™ Powered Damper gas water heaters meet or exceed the latest ENERGY STAR® requirements
Efficiency
- .65 -.70 UEF
- Enerfy Star® rated
Performance
- FHR: 69 - 85 gallons
- Recovery rate is up to 40.4 gallons at 90º F rise, depending on model
Electronic Diagnostic Valve
- Electronic gas control for improved monitoring and service
Low Emissions
- Eco-friendly burner, low NOx design
- Meets 40 ng/J NOx requierments
Technology
- 24 VAC flue damper, 120 VAC outlet required
- Includes 19-foot cord, 3-prong plug
- Standard Cat. I, double-wall, B-vent, 3"/4" combo vent
Maintenance Free Burner System
- Exclusive air/fuel shut-off device
- Maintenance free - no filter to clean
- Disables the heater in the presence of flammable vapor accumulation
Self-Cleaning
- Fights sediment and mineral build-up
- Reduces fuel costs
Longer Life
- Premium grade anode rod provides long-lasting tank protection
High Altitude Compliant
- Certified to 10,200 ft above sea level
Plus...
- Dual certified for both potable water and space heating
- Durable brass drain valve
- Temperature and pressure relief valve included
- Low lead compliant