2022 chrysler town and country transmission fluid capacity

The 2014 Chrysler Town and Country is a great option for transporting lots of people or accommodating lots of storage. But to keep it running at its best, you might want to know its engine oil capacity.

Staying on top of basic car maintenance is one of the most important things you can do to make sure your vehicle sticks around for the long haul. When it comes to oil changes, many drivers can take care of oil changes themselves—and save a little time and money in the process.

When that’s the case, it helps to know your vehicle’s engine oil capacity and required oil type. So here with these specs for the 2014 Chrysler Town and Country—plus more tips—is Jerry, the super app that helps drivers save money on car insurance shopping. As a bonus, you will learn how to find lower Chrysler Town and Country car insurance costs too!

2014 Chrysler Town and Country engine oil capacity

First, how much engine oil do you need for a 2014 Chrysler Town and Country?

The 2014 Chrysler Town and Country’s 3.6-liter engine has an oil capacity of 6 quarts, or 5.6 liters.

At first glance, it might be easy to mistake “3.6 liters” for your engine oil capacity, but relying on this could cause you to end up with too little engine oil when you’re ready for an oil change. But this measurement is actually referring to your engine’s displacement, which is the total volume your engine’s cylinders take up.

What kind of oil does a 2014 Chrysler Town and Country need?

In addition to knowing how much engine oil your Chrysler Town and Country holds, you will also need to know what kind it requires. Picking out the wrong type of engine oil could cause serious damage to your vehicle’s engine. 

The 2014 Chrysler Town and Country uses SAE 5W-20 engine oil

You can use synthetic engine oil, too—and it’s typically more advantageous to do so—provided that it meets the necessary specifications. Most important is that the engine oil has the correct viscosity grade and an API certification seal to show the necessary quality standards have been met.

As you explore your engine oil options, here are some worth considering: 

  • Chrysler’s recommendation: In your owner’s manual, Chrysler’s top brand recommendations for your 2014 Chrysler Town and Country’s engine oil are Mopar, Pennzoil, and Shell Helix.

RECOMMENDED

Compare auto insurance policies

No spam or unwanted phone calls · No long forms · No fees, ever

How often to change oil on a 2014 Chrysler Town and Country

Knowing your 2014 Chrysler Town and Country’s oil type and capacity is one thing—but when do you actually need to change the engine oil?

The manufacturer recommends that if you’re using conventional oil, you change your vehicle’s oil every 3,000 to 5,000 miles, or at least every six months if you’re a more infrequent driver.

If you’re using synthetic oil, it may last as long as 7,500 to 10,000 miles before needing an oil change.

But if you’re driving under more severe conditions, like on dusty dirt roads or in lengthy traffic jams, you might need to change your engine oil sooner than you’d otherwise need to.

That makes it necessary to check your engine oil periodically—about once a month or whenever you’re refueling are common recommendations. If your Town and Country is due for an oil change, here are some signs you might notice: 

  • Engine oil is dark brown or black (as opposed to light brown)

  • Engine oil has a grainy texture

  • Strange engine noises

  • Burning or oil smells coming from the engine

  • Worsened vehicle performance

How to change your oil and oil filter

When it’s finally time for your Town and Country to get an oil change, it’s time to gather your materials. Some of those will likely include: 

  • A socket wrench

  • An oil filter wrench

  • Funnel

  • Drain pan

  • New oil filter

  • New washer for drain bolt

  • Fresh 5W-20 engine oil

  • Towel(s) for cleanup

  • Gloves

When you have everything you need on hand, you can start by running your Town and Country’s engine for just a few minutes, then shut it off again. This will allow the engine oil to heat up, and it’ll drain more easily. Following that, these are the general steps involved with an oil change:

  • Remove the oil fill cap

  • Under the vehicle, remove the oil drain bolt and washer and let the old engine oil empty into the drain pan

  • Remove the old oil filter and replace it with the new one

  • Replace the oil drain bolt with a new washer

  • Add fresh engine oil to the proper fill level

Now, run your engine again for a few minutes and check for any leaks. After you’ve let the engine cool off, check the oil level one last time—If it’s right where it should be, great! If the level’s a little low, you can top it off.

Finally, remember to dispose of your old engine oil properly! It’s a hazardous material, so you can’t just dump it down the drain or throw it away with your regular trash. Many cities have locations for recycling used engine oil, and certain auto shops and car dealerships do, too.

Remember regular insurance policy maintenance

That’s one less car maintenance item to worry about for a while! When it comes to your policy insurance maintenance, the Jerry app makes it easier than ever to make sure you’re not overpaying for your car insurance costs.

Once you’ve downloaded this trustworthy sup app, it only takes about 45 seconds to answer a few easy questions. From there, Jerry will instantly gather customized quotes from up to 55+ top insurance providers. When you find the right coverage at the right rate, we’ll even help you switch to your new policy.

Best of all? Drivers who make the switch with Jerry enjoy an average savings of over $800 per year on their car insurance!

“Amazing service! Jerry helped me get insurance for the first time. Everything went smoothly without a hitch. I couldn’t ask for more!” —Tasha F.

How many quarts of transmission fluid does a Chrysler town and country take?

A 2016 Chrysler Town and Country transmission flush also uses about 10 quarts of fluid to completely clean and flush out the system.

How many quarts of transmission fluid does a Chrysler?

Registered. From my experience, dropping the pan and replacing the filter takes approximately 4.5 quarts of fluid. This is for the 62TE transmission.

How many quarts does a Chrysler town and country take?

Capacity: With filter 5.9 quarts. After refill check oil level.

What kind of transmission fluid is used by Chrysler Town and Country?

Castrol - Transmax ATF+4® Automatic Transmission Fluid 1 Quart (Part No. 15A9FA)