Backyard discovery buckley hill wooden swing set instructions

Official 3D interactive instructions from the world’s leading brands

Facebook-f Twitter Linkedin Youtube Instagram

• Solutions
  • Brands & Retailers
  • Professionals & Technicians
  • Government
• Resources
  • Download BILT
  • Case Studies
  • Integrations
  • Blog
  • Client Log In
• Support
  • Instructions on BILT
  • Contact a Brand
  • Suggest an Improvement
  • Suggest a Product
  • Frequently Asked Questions
• About
  • Our Story
  • Press
  • Events
  • Contact BILT
  • Careers

© 2015-2022 BILT Incorporated. All rights reserved.

• Terms of Use
• Privacy Statement

• PAGE 1

  Buckley Hill Wooden Swing Set Model # 2001046 Owner's Manual & Assembly Instructions MANUFACTURED BY: Backyard Discovery 3305 Airport Drive Pittsburg, KS 66762 800-856-4445 WARNING: FOR DOMESTIC USE ONLY. WARNING NOT SUITABLE FOR CHILDREN UNDER 36 MONTHS. SMALL PARTS. average 2 person assembly time assembly time may vary based on skill level For the most up to date assembly manual, to register your set, or to order replacement parts please visit www.backyarddiscovery.

• PAGE 2

  INSTALLATION SERVICES AVAILABLE!* Need a helping hand? Let our team of professionals handle the installation for you! *Installation services are only available to U.S. customers. With Go Configure, we bring you 18 years of experience right to your doorstep. We service a wide array of indoor and outdoor recreation products that most consumers don’t have the time or ability to deliver & install themselves.

• PAGE 3

  Owner’s Manual Please Read This Before Starting Assembly MISSING A PART? CALL US BEFORE GOING BACK TO THE STORE The store where you made your purchase does not stock parts for this item. If you have assembly questions or you are missing or have damaged parts, please call 1-800-856-4445 you can also visit www.backyarddiscovery.com or e-mail customerservice@backyarddiscovery.

• PAGE 4

  Owner’s Manual Limited Warranty Please read entire booklet completely before beginning the assembly process Please retain these instructions and your receipt for future reference. Keep them in a safe place where you can refer to them as needed. In order to provide you with the most efficient service, it is required that you provide us with the part numbers when ordering parts. For Your Records: Please take time and fill out the information below. This information will be needed for warranty issues.

• PAGE 5

  Owner’s Manual Operating Instructions and Safety Warnings WARNING: BURN HAZARD • Pay special attention to plastic and metal surfaces as they may be hot enough to cause burns. • Always check the temperature of the product before letting your children play on it. • Remember that the product may cause burns if left in direct sunlight. • Always be aware of the sun and weather conditions, and do not assume that the equipment is safe because the air temperature is not very high.

• PAGE 6

  Owner’s Manual Please Read This Before Starting Assembly Positioning Your Playcenter Suggested Playground Surfacing • The playcenter is designed to be installed on a level surface by an adult with an adult helper. Place in a flat area of your yard to minimize ground preparation. • Do not install home playground equipment over concrete, asphalt, packed earth, grass, carpet, or any other hard surface. A fall onto a hard surface can result in serious injury to the equipment user.

• PAGE 7

  Owner’s Manual Please Read This Before Starting Assembly APPENDIX A X3.1.3.2 Do not install loose-fill surfacing over hard surfaces such as concrete or asphalt. X3.1.4 Poured-In-Place Surfaces or Pre-Manufactured Rubber Tiles — You may be interested in using surfacing other than loose-fill materials – like rubber tiles or poured-in-place surfaces. X3.1.4.1 Installations of these surfaces generally require a professional and are not “do-it-yourself ” projects. X3.1.4.

• PAGE 8

  Owner’s Manual Instructions for Proper Maintenance IT IS IMPORTANT TO CHECK AND TIGHTEN ALL HARDWARE AT THE BEGINNING AND DURING THE SEASON AS THEY MAY LOOSEN DUE TO WOOD EXPANSION AND CONTRACTION. At the beginning of each play season Additional Maintenance • • • • • • • • • Tighten all hardware. Lubricate all metallic moving parts per manufacturer’s instructions. Check all protective coverings on bolts, pipes, edges, and corners. Replace if they are loose, cracked, or missing.

• PAGE 9

  Owner’s Manual Instructions for Proper Maintenance Your Backyard Discovery structure is designed and constructed of quality materials. As with all outdoor products it will weather and wear. To maximize the enjoyment, safety and life of your structure it is important that you properly maintain it. About Our Wood Backyard Discovery uses 100% Cedar (C. Lanceolata) wood.

• PAGE 10

  Owner’s Manual Assembly Tips Protrusion Hazard Incorrect Correct If you see exposed threads and your bolt protrudes beyond the T-Nut you may have over tightened the bolt or used incorrect hardware. If you’ve overtightened, remove the bolt and add washers to eliminate the protrusion. 1/8” Proper Hardware Assembly BOLT Bolt and T-Nut Assembly Tap T-nut into the provided hole. Insert your bolt through the lock washer and insert into the provided hole opposite from the T-Nut.

• PAGE 11

  Owner’s Manual Assembly Tips ASSEMBLY TIP: Keep an eye out for these boxes which will contain helpful pictures and information making the assembly process as quick and painless as possible. Sorting Wood E1 E2 F1 F2 G1 G2 When removing the wood from the boxes we recommend arranging them by part number before you begin assembly. This will allow for faster assembly and easily identify any parts that may be missing or damaged.

• PAGE 12

  Owner's Manual Tools Required for Installation 12

• PAGE 13

  Owner's Manual Basic Setup Dimensions & Assembly Notes Place the set on level ground, not less than 6'-7" [2 m] from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires. • While assembling unit, take time before and after each phase to make sure fort is level. If fort is not level, assembly will be difficult and improper assembly may result. Extra care must be taken to insure the fort is square.

• PAGE 14

  Parts Identification Owner's Manual Wood Components (Not to Scale) E1 (1) POST ASSEMBLY - W2A02839 E3 LEFT BACK UPRIGHT - W4L13210 (1) 1 3/8"x3 3/8"x75" (36x86x1905) E4 RIGHT BACK UPRIGHT - W4L13211 (1) E77 (2) F1 UPRIGHT - W4L13283 (1) 1 7/16"x2 3/8"x43 3/4" (36x60x1111) F2 UPRIGHT - W4L13284 G1 (1) 1 3/8"x3 3/8"x75" (36x86x1905) E2 (1) (1) RIGHT FRONT UPRIGHT - W4L13208 1 7/16"x3 3/8"x75" (36x86x1905) 1 3/8"x3 3/8"x75" (36x86x1905) ANGLE BRACE - W4L13293 1 3/8"x3 3/8"x72 7/8" (36x

• PAGE 15

  Parts Identification Owner's Manual Wood Components (Not to Scale) J3 (1) L1 (1) SAFETY RAIL - W4L13299 1"x2 3/8"x36 5/8" (24x60x930) FLOOR BOARD - W4L13223 M5 GROUND RAIL - W4L13209 (1) 5/8"x3 3/8"x36 5/8" (16x86x930) M6 GROUND RAIL - W4L13296 (1) 5/8"x3 3/8"x21 3/8" (16x86x542) M77 SLIDE BRACE - W4L13297 M78 SLIDE BRACE - W4L13298 5/8"x4 3/8"x33 3/4" (16x112x856) (1) L2 (1) L3 (1) L4 FLOOR BOARD - W4L13225 5/8"x4 3/8"x33 3/4" (16x112x856) LADDER RUNG - W4L13286 L5 TOP LADDER

• PAGE 16

  Owner's Manual Parts Identification Hardware Components H100021 BOLT WH (1) 5/16x4 1/2 H100017 BOLT WH (4) 5/16x3 1/4 H100029 LAG SCREW WH (1) 5/16x3 H100013 BOLT WH (11) 5/16x2 1/4 H100028 LAG SCREW WH (8) 5/16x2 1/2 H100012 BOLT WH (20) 5/16x2 H100027 LAG SCREW WH (22) 5/16x2 H100011 BOLT WH (6) 5/16x1 3/4 H100005 NUT BARREL WH (10) 5/16x7/8 H100010 BOLT WH (8) 5/16x1-1/2 H100004 NUT BARREL WH (7) 5/16 x 5/8 H100009 BOLT WH (2) 5/16x1 1/4 H100074 T-NUT (49) 5/16 H100099 SWING HANGER (4) 5/

• PAGE 17

  Owner's Manual Parts Identification Hardware Components H100047 BOLT HEX (2) 5/16x2 3/4 H100044 BOLT HEX (2) 5/16x2 H100090 SCREW PFH (22) 8x2 1/2" H100095 WASHER SPLIT (4) 5/16 H100111 SCREW PFH (13) 8x2 H100108 WASHER LOCK INT (9) 8x15 H100089 SCREW PFH (11) 8x1 3/4 H100042 BOLT HEX (2) 5/16x1 1/4 H100086 SCREW PFH (71) 8x1 1/2 H100649 LAG SCREW WH (3) 1/4x2 1/2 H100138 WASHER LOCK EXT (8) 6x15 H100088 SCREW PFH (17) 8x1 1/8 H100139 WASHER LOCK EXT (7) 8x15 H100145 LAG SCREW WH (3) 1/4x1 1/2 H

• PAGE 18

  Owner's Manual Parts Identification Accessory Components (Not to Scale) A100028 HAND GRIP (2) GREEN PLASTIC A100175 (1) BYD ID TAG (MEDIUM) AGES 3-10 A4M01110 90° L-BRACKET (6) BLK A4M01046 L BRACKET (2) 2.

• PAGE 19

  Owner's Manual Parts Identification Accessory Components (Not to Scale) A6P00389 6 FT SLIDE RAIL (1) LEFT A6P00390 6 FT SLIDE RAIL (1) RIGHT A6P00391 (1) 6 FT SLIDE BED A6P00323 (1) A6P00379 (1) A6P00380 ROOF TARP (2) 19 CHALK BOARD MESH PANEL

• PAGE 20

  STEP 1 LADDER ASSEMBLY L4 (x4) A6P00037 LADDER RUNG - W4L13286 (x4) GREEN HC ROCK #2 5/8"x4 3/8"x16 7/8" (16x112x430) H100063 BOLT PTH (x8) 1/4x3/4 H100108 (8) L4 (x4) 037 (x4) LADDER RUNG GREEN HC ROCK #2 108 (x8) 072 (x8) WASHER - 8x15 T-NUT - 1/4" 063 (x8) BOLT - 3/4" TIP: INSTALL THE T-NUTS FIRST LEFT RUNG ASSEMBLY (x2) RIGHT RUNG ASSEMBLY (x2) 20 WASHER LOCK INT 8x15 H100072 T-NUT (x8) 1/4

• PAGE 21

  STEP 2 LADDER ASSEMBLY LEFT RUNG ASSEMBLY (x2) L3 (x1) H100086 SCREW PFH (x20) 8x1 1/2 LADDER RUNG - W4L13285 5/8"x4 3/8"x16 7/8" (16x112x430) RIGHT RUNG ASSEMBLY (x2) F1 (x1) F2 (x1) UPRIGHT - W4L13283 1 7/16"x2 3/8"x43 3/4" (36x60x1111) UPRIGHT - W4L13284 1 7/16"x2 3/8"x43 3/4" (36x60x1111) F2 (x1) TIP: ALIGN HOLES IN RUNGS WITH HOLES IN UPRIGHTS.

• PAGE 22

  SLIDE ASSEMBLY STEP 1 M77 (1) A6P00391 (1) SLIDE BRACE - W4L13297 5/8"x3 3/8"x14 1/4" (16x86x362) 6 FT SLIDE BED H100115 BOLT WH (2) 5/16x1/2 H100074 T-NUT (2) 5/16 PLACE 'M77' SLIDE BRACE BOARD 1/2" FROM THE BOTTOM EDGE OF THE SLIDE BED. USING THE BOARD AS A TEMPLATE, MARK WHERE THE PILOT HOLES WILL BE DRILLED. USE A 3/8" DRILL BIT TO DRILL THE PILOT HOLES INTO THE SLIDE BED. ATTACH THE SLIDE BED SUPPORT BOARD USING THE HARDWARE PROVIDED. TIP: PRE-BENDING THE ENDS WILL EASE ASSEMBLY.

• PAGE 23

  SLIDE ASSEMBLY STEP 2 A6P00390 (1) M78 (1) 6 FT SLIDE RAIL RIGHT SLIDE BRACE - W4L13298 5/8"x3 3/8"x14 1/4" (16x86x362) A6P00389 (1) 6 FT SLIDE RAIL LEFT H100090 SCREW PFH (16) 8x2 1/2" NOTE: USING A 1/8" DRILL BIT, DRILL PILOT HOLES IN EACH INDENTATION ALONG EACH SIDE RAIL. THERE SHOULD BE 8 INDENTIONS ON EACH RAIL. PLACE THE SLIDE RAIL ON FLAT SURFACE. STARTING AT THE BOTTOM, INSERT THE SLIDE BED INTO THE CHANNEL ON THE INSIDE OF THE RAIL.

• PAGE 24

  SWING BEAM STEP 1 A100140 L BRACKET (2) 66x66x127 SB74 (1) SWING BEAM 2 POSITION - W4L13291 2"x5 1/4"x68 3/4" (50x134x1745) A100325 (1) H100047 BOLT HEX (2) 5/16x2 3/4 H100105 WASHER FLAT (4) 8x27 SWING BEAM SWING BEAM A100326 EXTENSION EXTENSION (1) BRACKET-RIGHT BRACKET-LEFT H100011 BOLT WH (3) 5/16x1 3/4 H100110 NUT LOCK (2) 5/16 A100175 (1) H100005 NUT BARREL WH (3) 5/16x7/8 140 (x2) L BRACKET 66x66x127 047 (x2) BOLT - 2 3/4" 105 (x4) WASHER - 8x27 175 (x1) BYD ID TAG (MEDIUM) AGES 3-10

• PAGE 25

  STEP 2 SWING BEAM H100099 SWING HANGER (4) 5/16x9 1/2 H100103 WASHER SAFETY (4) 17x30 H100105 WASHER FLAT (4) 8x27 H100110 NUT LOCK (4) 5/16 110 (x4) NUT - 5/16" 105 (x4) WASHER - 8x27 103 (x4) WASHER - 17x30 099 (x4) SWING HANGER - 9 1/2" 25

• PAGE 26

  STEP 3 SWING BEAM E77 (2) W71 (1) ANGLE BRACE - W4L13293 1 3/8"x3 3/8"x72 7/8" (36x86x1850) H79 SWING BEAM SUPPORT - W4L13292 H100021 BOLT WH (1) 5/16x4 1/2 H100031 WASHER LOCK EXT (1) 12x19 END SUPPORT - W4L13294 1"x3 1/2"x39 1/2" (24x86x1000) (1) 2"x3 3/8"x44 1/4" (50x86x1123) H100013 BOLT WH (2) 5/16x2 1/4 H100030 WASHER LOCK EXT (5) 8x19 H100027 LAG SCREW WH (2) 5/16x2 H100005 NUT BARREL WH (1) 5/16x7/8 H100074 T-NUT (2) 5/16 W71 (x1) SWING BEAM SUPPORT 031 (x1) WASHER - 12x19 005 (x1)

• PAGE 27

  STEP 4 SWING BEAM SWING BEAM SUB ASSEMBLY (FROM STEP 2) H100011 BOLT WH (2) 5/16x1 3/4 'A' FRAME SUB ASSEMBLY (FROM STEP 3) 011 (x2) BOLT - 1 3/4" 005 (x2) NUT BARREL - 7/8" 27 H100005 NUT BARREL WH (2) 5/16x7/8

• PAGE 28

  STEP 1 FORT ASSEMBLY H8 FLOOR RAIL - W4L13295 (1) 1"x3 3/8"x36 5/8" (24x86x930) N3 TOP RAIL - W4L13220 (1) M5 (1) GROUND RAIL - W4L13209 H100028 LAG SCREW WH (3) 5/16x2 1/2 5/8"x3 3/8"x36 5/8" (16x86x930) 5/8"x2 3/8"x36 5/8" (16x60x930) E1 (1) E2 (1) H100027 LAG SCREW WH (6) 5/16x2 RIGHT FRONT UPRIGHT - W4L13208 1 3/8"x3 3/8"x75" (36x86x1905) H100030 WASHER LOCK (9) EXT 8x19 POST ASSEMBLY - W2A02839 1 7/16"x3 3/8"x75" (36x86x1905) 030 (x2) WASHER - 8x19 027 (x2) LAG SCREW - 2" N3 (x1)

• PAGE 29

  STEP 2 FORT ASSEMBLY E3 LEFT BACK UPRIGHT - W4L13210 (1) 1 3/8"x3 3/8"x75" (36x86x1905) E4 RIGHT BACK UPRIGHT - W4L13211 (1) M1 (1) H100028 LAG SCREW WH (4) 5/16x2 1/2 H100027 LAG SCREW WH (8) 5/16x2 1 3/8"x3 3/8"x75" (36x86x1905) GROUND RAIL - W4L13215 5/8"x3 3/8"x36 5/8" (16x86x930) N2 (2) H1 FLOOR RAIL - W4L13212 1"x3 3/8"x36 5/8" (24x86x930) (1) H100030 WASHER LOCK (12) EXT 8x19 SIDE RAIL - W4L13218 5/8"x2 3/8"x36 5/8" (16x60x930) 030 (x4) WASHER - 8x19 N2 (x2) 027 (x4) LAG SCREW -

• PAGE 30

  STEP 3 FORT ASSEMBLY M3 (1) N1 (1) ANGLE GROUND RAIL - W4L13217 SIDE RAIL - W4L13214 5/8"x2 3/8"x24 1/8" (16x60x612) H4 (2) H100017 BOLT WH (2) 5/16x3 1/4 5/8"x3 3/8"x65 5/8" (16x86x1666) H2 (1) FLOOR RAIL - W4L13213 1"x3 3/8"x26" (24x86x660) H100012 BOLT WH (4) 5/16x2 FLOOR SUPPORT - W4L13222 1"x3 3/8"x3 3/8" (24x86x86) H2 (x1) 030 (x2) WASHER - 8x19 H100074 T-NUT (6) 5/16 H4 (x2) 074 (x2) T-NUT - 5/16" 017 (x2) BOLT - 3-1/4" 030 (x2) WASHER - 8x19 074 (x2) 012 (x2) T-NUT - 5/16" BOLT

• PAGE 31

  STEP 4 FORT ASSEMBLY M2 (1) GROUND RAIL - W4L13216 5/8"x3 3/8"x25 3/8" (16x86x644) H4 (2) H2 (1) FLOOR RAIL - W4L13213 1"x3 3/8"x26" (24x86x660) FLOOR SUPPORT - W4L13222 H100017 BOLT WH (2) 5/16x3 1/4 H100012 BOLT WH (2) 5/16x2 1"x3 3/8"x3 3/8" (24x86x86) H100074 T-NUT (4) 5/16 H100030 WASHER LOCK (4) EXT 8x19 H2 (x1) 030 (x2) 074 (x2) WASHER - 8x19 H4 (x2) T-NUT - 5/16" 017 (x2) BOLT - 3-1/4" 030 (x2) WASHER - 8x19 074 (x2) 012 (x2) T-NUT - 5/16" BOLT - 2" M2 (x1) 31

• PAGE 32

  STEP 5 FORT ASSEMBLY H100090 SCREW PFH (4) 8x2 1/2" H3 (1) T1 FLOOR RAIL - W4L13221 (2) 1"x3 3/8"x24 1/8" (24x86x612) A100314 (1) FLOOR SUPPORT - W4L13289 15/16"x1 5/16"x17 1/4" (24x34x438) "A" REVISION TAG H100089 SCREW PFH (10) 8x1 3/4 H100128 SCREW PWH (2) 8x5/8 T1 (x2) 128 (x2) 089 (x10) SCREW - 5/8 H3 (x1) 314 (x1) "A" REVISION TAG (APPROXIMATE LOCATION) 090 (x4) SCREW - 2 1/2" 32 SCREW - 1 3/4"

• PAGE 33

  STEP 6 FORT ASSEMBLY L1 (1) M4 (5) FLOOR BOARD - W4L13223 5/8"x4 3/8"x33 3/4" (16x112x856) FLOOR BOARD - W4L13224 5/8"x3 3/8"x36 5/8" (16x86x930) L2 (1) N2 (1) FLOOR BOARD - W4L13225 5/8"x4 3/8"x33 3/4" (16x112x856) SIDE RAIL - W4L13218 5/8"x2 3/8"x36 5/8" (16x60x930) H100027 LAG SCREW WH (2) 5/16x2 H100086 SCREW PFH (43) 8x1 1/2 H100030 WASHER LOCK (2) EXT 8x19 NOTE: INSTALL FLOOR BEFORE N2 BOARD.

• PAGE 34

  STEP 7 FORT ASSEMBLY A6P00380 (1) G2 TOP RAIL - W4L13228 (1) 1"x5 1/4"x37" (24x134x940) N1 SIDE RAIL - W4L13214 (3) 5/8"x2 3/8"x24 1/8" (16x60x612) H100013 BOLT WH (4) 5/16x2 1/4 H100012 BOLT WH (6) 5/16x2 H100074 T-NUT (10) 5/16 H100128 SCREW PWH (2) 8x5/8 H100030 WASHER LOCK (10) EXT 8x19 MESH PANEL 074 (x4) T-NUT - 5/16" NOTE HOLE LOCATION 030 (x4) WASHER - 8x19 013 (x4) BOLT - 2 1/4 G2 (x1) N1 (x3) (x1) MESH PANEL 030 (x6) WASHER - 8x19 012 (x6) BOLT - 2" MESH PANEL GROMMET TOP &

• PAGE 35

  STEP 8 FORT ASSEMBLY A6P00380 (1) H100013 BOLT WH (4) 5/16x2 1/4 G1 TOP RAIL - W4L13219 (1) 1"x5 1/4"x37" (24x134x940) N1 SIDE RAIL - W4L13214 (3) 5/8"x2 3/8"x24 1/8" (16x60x612) H100012 BOLT WH (6) 5/16x2 H100074 T-NUT (10) 5/16 H100128 SCREW PWH (2) 8x5/8 H100030 WASHER LOCK (10) EXT 8x19 MESH PANEL 074 (x4) T-NUT - 5/16" 030 (x4) WASHER - 8x19 128 (x2) SCREW - 5/8 013 (x4) BOLT - 2 1/4 NOTE HOLE LOCATION G1 (x1) N1 (x3) 030 (x6) (x1) WASHER - 8x19 MESH PANEL 012 (x6) 074 (x6) B

• PAGE 36

  STEP 9 FORT ASSEMBLY H100027 LAG SCREW WH (1) 5/16x2 H100029 LAG SCREW WH (1) 5/16x3 H100010 BOLT WH (1) 5/16x1-1/2 (1) LADDER ASSEMBLY H100030 WASHER LOCK (3) EXT 8x19 H100074 T-NUT (1) 5/16 074 (x1) T-NUT - 5/16" 010 (x1) BOLT - 1 1/2" 029 (x1) LAG SCREW - 3" LADDER ASSEMBLY (1) 030 (x3) WASHER - 8x19 027 (x1) LAG SCREW - 2" 36

• PAGE 37

  STEP 10 FORT ASSEMBLY M6 (1) GROUND RAIL - W4L13296 L5 5/8"x3 3/8"x21 3/8" (16x86x542) (1) TOP LADDER RUNG - W4L13287 5/8"x4 3/8"x16 7/8" (16x112x430) A4M01046 L BRACKET (1) 2.5x38x55x55 H100027 LAG SCREW WH (1) 5/16x2 H100030 WASHER LOCK (1) EXT 8x19 H100115 BOLT WH (2) 5/16x1/2 H100031 WASHER LOCK (2) EXT 12x19 L5 (x1) 086 (x4) SCREW - 1 1/2" 046 (x1) L BRACKET 2.

• PAGE 38

  STEP 11 FORT ASSEMBLY H100088 SCREW PFH (16) 8x1 1/8 N6 (4) PICKET - W4L13281 5/8"x2 3/8"x15 1/8" (16x60x385) J2 (2) PICKET - W4L13282 1"x2 3/8"x15 1/8" (24x60x385) H100121 SCREW PFH (8) 8x3/4 121 (x8) SCREW - 8x3/4" 1 1/2" 1 1/2" 1 1/2" J2 (x2) N6 (x4) 088 (x16) SCREW - 1 1/8" 38

• PAGE 39

  STEP 12 FORT ASSEMBLY H100392 SCREW PWH BLK (6) 8x3/4 A6P00323 CHALK BOARD (1) 323 (x1) CHALK BOARD 392 (x6) SCREW - 3/4" 39

• PAGE 40

  STEP 13 FORT ASSEMBLY J1 (1) UPRIGHT - W4L13226 1"x2"x36" (24x52x914) A4M01046 L BRACKET (1) 2.5x38x55x55 H100010 BOLT WH (1) 5/16x1-1/2 H100145 LAG SCREW WH (1) 1/4x1 1/2 H100115 BOLT WH (1) 5/16x1/2 H100005 NUT BARREL WH (1) 5/16x7/8 H100031 WASHER LOCK (1) EXT 12x19 H100030 WASHER LOCK (1) EXT 8x19 074 (x1) T-NUT - 5/16" 030 (x1) WASHER - 8x19 010 (x1) BOLT - 1 1/2" J1 (x1) 145 (x1) 115 (x1) LAG SCREW - 1 1/2" BOLT - 1/2" 031 (x1) 046 (x1) WASHER - 12x19 L BRACKET 2.

• PAGE 41

  STEP 14 FORT ASSEMBLY H100010 BOLT WH (1) 5/16x1-1/2 H6 (1) H100649 LAG SCREW WH (1) 1/4x2 1/2 ANGLE BRACE - W4L13288 15/16"x3 3/8"x40 1/16" (24x86x1018) H100030 WASHER LOCK (1) EXT 8x19 649 (x1) LAG SCREW - 2 1/2" 138 (x1) WASHER - 6x15 H6 (x1) 074 (x1) T-NUT - 5/16" 010 (x1) 030 (x1) BOLT - 1 1/2" WASHER - 8x19 41 H100074 T-NUT (1) 5/16 H100138 WASHER LOCK (1) EXT 6x15

• PAGE 42

  STEP 15 FORT ASSEMBLY H100490 BOLT WH (4) 1/4x5/8 H100137 BOLT WH (4) 1/4x1 H5 (2) H100136 NUT BARREL WH (4) 1/4x5/8 TOP RAIL - W4L13227 1"x3 3/8"x36 5/8" (24x86x930) A4M01110 90° L-BRACKET (4) BLK H100111 SCREW PFH (8) 8x2 H100139 WASHER LOCK (4) EXT 8x15 111 (x8) SCREW - 2" 110 (x4) 90° L-BRACKET - BLK 136 (x4) NUT BARREL - 5/8" 072 (x4) T-NUT - 1/4" 139 (x4) 490 (x4) WASHER - 8x15 BOLT WH - 5/8" 137 (x4) BOLT WH - 1" H5 (x2) 42 H100072 T-NUT (4) 1/4

• PAGE 43

  STEP 16 FORT ASSEMBLY N5 (1) N4 (2) TOP RAIL - W4L13280 5/8"x2 3/8"x36 5/8" (16x60x930) H100010 BOLT WH (4) 5/16x1-1/2 H100030 WASHER LOCK (4) EXT 8x19 H100074 T-NUT (4) 5/16 TOP RAIL - W4L13229 5/8"x2 3/8"x21 1/8" (16x60x538) A4M01110 90° L-BRACKET (2) BLK H100490 BOLT WH (2) 1/4x5/8 H100141 BOLT WH (2) 1/4 x 1/2" H100136 NUT BARREL WH (2) 1/4x5/8 H100139 WASHER LOCK (2) EXT 8x15 H100072 T-NUT (2) 1/4 N5 (x1) 074 (x4) T-NUT - 5/16" 110 (x2) 90° L-BRACKET - BLK 072 (x2) 030 (x4) T-NUT - 1/

• PAGE 44

  STEP 17 FORT ASSEMBLY H7 (2) H100649 LAG SCREW WH (2) 1/4x2 1/2 ANGLE BRACE - W4L13290 15/16"x3 3/8"x11 13/16" (24x86x300) 649 (x2) LAG SCREW - 2 1/2" 138 (x2) WASHER - 6x15 H7 (x2) 44 H100138 WASHER LOCK (2) EXT 6x15

• PAGE 45

  STEP 18 FORT ASSEMBLY H100044 BOLT HEX (2) 5/16x2 (1) SWING BEAM ASSEMBLY H100105 WASHER FLAT (4) 8x27 105 (x4) WASHER - 8x27 095 (x4) WASHER - 5/16" 044 (x2) BOLT HEX - 2" 042 (x2) BOLT HEX - 1 1/4" (BOTTOM HOLES) (1) SWING BEAM ASSEMBLY 45 H100042 BOLT HEX (2) 5/16x1 1/4 H100095 WASHER SPLIT (4) 5/16 074 (x4) T-NUT - 5/16" H100074 T-NUT (4) 5/16

• PAGE 46

  STEP 19 FORT ASSEMBLY H100070 SCREW PWH (10) 8x3/4 A6P00379 (1) ROOF TARP (x1) ROOF TARP 070 (x10) SCREW - 8x3/4" 46

• PAGE 47

  STEP 20 FORT ASSEMBLY A6P00397 ROPE-CHAIN GREEN / (2) SEAT GREEN 397 (x2) SWING ASSEMBLY NOTE: WHEN HANGING YOUR SWINGS IT IS RECOMMMENDED THAT THE BOTTOM OF THE SWING SEAT, WHEN SITTING ON IT, IS LOCATED NO LOWER THAN (35cm) 13-7/8 INCHES FROM THE GROUND.

• PAGE 48

  STEP 21 FORT ASSEMBLY H100138 WASHER LOCK (4) EXT 6x15 H100145 LAG SCREW WH (2) 1/4x1 1/2 A100028 HAND GRIP (2) GREEN PLASTIC H100142 BOLT WH (2) 1/4x1-1/4 H100072 T-NUT (2) 1/4 072 (x2) T-NUT - 1/4" 138 (x4) WASHER - 6x15 142 (x2) BOLT WH - 1-1/4" 028 (x2) HAND GRIP GREEN PLASTIC 145 (x2) LAG SCREW - 1 1/2" 48

• PAGE 49

  STEP 22 FORT ASSEMBLY H100009 BOLT WH (2) 5/16x1 1/4 H100222 BOLT WH (4) 5/16x3/4 A100178 AUGER GROUND (6) STAKE H100005 NUT BARREL WH (2) 5/16x7/8 H100031 WASHER LOCK (6) EXT 12x19 H100004 NUT BARREL WH (4) 5/16 x 5/8 NOTE: TWIST GROUND STAKES INTO GROUND IN LOCATIONS SHOWN. USING GROUND STAKE AS A GUIDE, DRILL 7/16" HOLE FOR HARDWARE.

• PAGE 50

  STEP 23 FORT ASSEMBLY H100115 BOLT WH (2) 5/16x1/2 9208018 SLIDE (1) ASSEMBLY 7 1/8 H100074 T-NUT (2) 5/16 NOTE: CENTER SLIDE IN OPENING. USING DIMENSIONS SHOWN AS A TEMPLATE, DRILL (2) 3/8" HOLES THROUGH SLIDE & DECK FOR HARDWARE.

• PAGE 51

  STEP 24 FORT ASSEMBLY J3 (1) H100111 SCREW PFH (4) 8x2 SAFETY RAIL - W4L13299 1"x2 3/8"x36 5/8" (24x60x930) 111 (x4) SCREW - 2" J3 (x1) 51

How long does it take to assemble backyard discovery swing set?

How do you reset a swing set?

How long does it take to assemble an outdoor playset?