Bissell proheat 2x revolution pet pro hose attachment

This listing was ended by the seller because there was an error in the listing.

Description

Seller assumes all responsibility for this listing.

eBay item number:354238719494

Item specifics

Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is ...

More to explore :

  • BISSELL Crevice Tool Attachment Vacuum Cleaner Parts,
  • BISSELL Brush Head/Tool Attachment Vacuum Cleaner Parts,
  • Bissell Hoses,
  • BISSELL Upholstery Household Steam Cleaners,
  • BISSELL Tools & Workshop Equipment,
  • BISSELL BISSELL CrossWave Vacuum Cleaners,
  • Power Tool Sets 2 Tools,
  • BISSELL Bissel PowerForce Helix Vacuum Cleaners,
  • BISSELL Carpet Cleaners,
  • Vacuum Cleaner Bags for BISSELL BISSELL Style 7

Description

Seller assumes all responsibility for this listing.

eBay item number:155133012867

Item specifics

Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is ...

More to explore :

  • BISSELL Crevice Tool Attachment Vacuum Cleaner Parts,
  • BISSELL Brush Head/Tool Attachment Vacuum Cleaner Parts,
  • Bissell Hoses,
  • BISSELL Upholstery Household Steam Cleaners,
  • BISSELL Tools & Workshop Equipment,
  • BISSELL BISSELL CrossWave Vacuum Cleaners,
  • Miele Brushes Head/Tools Attachment,
  • Crevice Tool Attachment Vacuum Cleaner Parts,
  • BISSELL Carpet Cleaners,
  • BISSELL Vacuum Cleaners

No Suction at Hose | How to Videos | ProHeat 2X® Revolution® Pet Pro

If you are experiencing weak or no suction from the hose on your Proheat 2x Revolution Pet Pro here are a few tips that may helpL

  • First, make sure the dirty water tank is empty and seated properly
  • To remove, press down on the tank handle and tilt the tanks towards you and pull up and away to remove it
  • Empty the tank by pulling up on the rubber tab and pouring out any dirty water 
  • Inspect the tank for any cracks and replace as needed 
  • Make sure there is no pet hair or debris on the red motor duct 
  • It's important that the rubber tab is sealed tightly
  • Press firmly on all edges of the rubber tab to secure it 
  • Now with the dirty tank empty, you can replace it 
    • This requires a slight tilt to the tank as you return it
  • Another issue that can cause low suction could be the hose isn't fully attached to the nozzle or is damaged 
  • Make sure the hose is snapped into place and the colored hose release clip is facing out away from the machine 
  • Also check to make sure the tool you're using is tightly attached to the hose 
  • While checking the hose and tool scan the hose to ensure there are no cracks or tears in the holes

Now you're ready to get back to cleaning with your Revolution Pet Pro

Was this answer helpful?

Top reviews from the United States

There was a problem filtering reviews right now. Please try again later.

Reviewed in the United States 🇺🇸 on September 1, 2022

Reviewed in the United States 🇺🇸 on August 22, 2021

I am a mobile detailer, and needed a extractor head for a mock up extractor im using. I am using a Johnny Vac jv125 that uses metric hoses. I found that 1 1/4 hoses here in the USA work for this. SO this head seem to work great Glad i did this. Although from a bissle unit. this head lets me see my progress a must have

Reviewed in the United States 🇺🇸 on January 16, 2021

The water did transfer to my tool tip through the line but the 2nd one worked perfect

Reviewed in the United States 🇺🇸 on January 8, 2017

This attachment is actually somewhat bigger than the one that came with my cleaner and that was cool. The less cool part is that while it says that this a direct replacement for the original, it isn't quite true. When you try to place it on the hose, the part that snaps into the sprayer line isn't wide enough and it will split at the connection, causing it to leak. It does a good job of cleaning, but you need to first deal with the split or you are going have cleaning solution everywhere. It will start spraying out the side if you don't fix it. But I had to replace the original one that came with the unit. It needed to be replaced because the plastic interface with the sprayer line actually cracked apart in the same place as this replacement and leaked everywhere. This replacement was not as bad, but it still leaked.

Reviewed in the United States 🇺🇸 on September 28, 2020

I paid $13 for this and it shampooed both my sofas with amazing power! If it senses moisture, it really suctions it out. If you don't think it works, check the dirty water emptying into the reservoir. So great paying so little for something that works so incredibly well!

Reviewed in the United States 🇺🇸 on February 11, 2021

Reviewed in the United States 🇺🇸 on July 26, 2021

Perfect replacement. Bigger head. Used on furniture.

Reviewed in the United States 🇺🇸 on October 18, 2020

works fine. as usual fast and prompt delivery.
accessory fit and installed perfect.

Can the Bissell ProHeat 2x revolution be used as a vacuum?

No it can not be used aa a vacuum cleaner., it is a carpet cleaner, to be used as cleaning Did you read your instructions?