How to clean top speaker on iphone

I used some 3M double sided tape to clean mine. It comes in a roll about an inch wide with glossy red anti adhesive on it. I cut a little bit of it and squeezed it into the earpieces depression and kept on doing that until it was all clean! It worked very well.

Not any kind of double sided tape will do though, some come as a foam layer with adhesive strips on both sides, this one was sticky all the way through, like the material itself was all this stretchy, tacky, grey tape.

edit: This stuff

If your iPhone speakers sound mumbly, you may have trouble hearing calls or playing your favorite song. It clearly indicates that it is time to clean the speakers.

iPhone speakers generally get clogged over time due to dust, debris, and smudges. If you encounter a muffled sound, you dont need to run after a replacement. You can use a few DIY techniques, like using speaker cleaner applications and a cleaning gel, to get your iPhones audio back.

Besides that, we have compiled a list of methods to help you with the cleaning process.

There are a variety of methods you can use to clean the iPhone Speakers. But before you jump to those methods, you should ensure if it is an issue with the audio you are playing or the entire speakers.

You can play your iPhones ringtone to analyze the speakers. Simply navigate to Settings > Sounds & Haptics and drag the volume slider. If the ringtone plays well without any crackling or mumbly sound, there is probably an issue with the audio you are trying to listen to. If not, its time to clean your speakers.

Here, we have listed the best 6 ways you can use to clean your iPhones speakers.

Clean Speakers Using a Brush

The first and easiest method to clean the speaker is using a brush with soft bristles. You often put your phone in your pants pocket. The lint and fabrics of the apparel can get into the speaker and make the sound muffled.

You can either use a toothbrush or paintbrush as per your availability to clean the speakers. The bristles in your brush easily help to remove the dust and fabrics stuck in the speaker grills.

Likewise, in case of debris or smudges stuck in the speaker, you can use a toothpick to remove them quickly. Or, use a cotton swab in case of an ear speaker.

1. Remove your iPhones casing.
   
   
2. Grab a toothbrush or paintbrush with soft bristles. You can even use your Mascara brush.
3. Then grab a flashlight. If you dont have one, you can also use another phones flashlight.
4. Please turn on the flashlight and turn your iPhones speaker towards it. You will clearly see what actually is interfering with the audio.
5. Now take the brush, insert the bristles into the speaker grills, and start brushing. Please be gentle. If you act forcibly, you can further damage the speakers.
   
   
6. In case you are using a toothpick to remove debris, tilt your phone and gently pull the junk outside.
   
   
7. Finally, you can rub a cotton swab over your ear speaker and get it cleaned.
   
   

Note: Make sure the brushes are new ones. Used brushes have respective residues, and you may further insert them into the speakers.

Use a Vacuum or Blower

If you can not get the dust or smudges out of your iPhone speakers using a brush or a toothpick, you can next use a vacuum or blower. The former uses suction power, while the latter uses air jet flow. They both can get smudges out of your speaker.

These devices do not have high air pressure to damage the speakers. If you think the blower pressure is high, consider placing the blower at a distance.

Note: Please avoid using compressed air to clean the speakers. They have high air pressure that damages not only the speaker but the internal components as well.

Use a Cello Tape

You can also use cello tape to get the dust out of your speakers. When you place a piece of cello tape over your phone speakers, the dust in the speakers gets attached to the tape. You can use the desired number of pieces of tape till you feel you have wiped out everything from the speaker grills.

1. Take a piece of cello tape in your fingers tip.
   
   
2. Face the sticky side of the tape towards the speaker and press it such that the taps reach the inner part of the speaker grills.
   
   
3. Remove the tape. You will see dust attached to the tape.
   
   
4. Again take another piece of tape and do the same till there is no dust attached to the tape.

Use Cleaning Gel

Cleaning gel, available in slime, is also helpful in quickly cleaning the speakers. It can be a bit costlier but works better than the cello tape since it quickly reaches the inner portion of the speaker grills. Simply take a cleaning slime and roll it over the speaker. It will collect any dust and debris from the speakers and clean them.

Note: Please do not use any kind of liquid, alcohol, or sanitizer to clean the speakers.

Use Applications to Clean Speakers

Many applications like Clean Tune - Speaker Cleaner are available on the App Store, which lets you clean the speakers without using other tools. It is most effective in case you get water into your speakers, and they start acting up.

These applications use sound waves of a specific frequency range that cause the speakers to vibrate and remove water and dust. It would help if you certainly gave it a try. There are also many Youtube videos available that do the same as those speaker cleaners applications do.

Tip: Most of the iPhones are splashproof and do not cause any issues if water gets into the speakers. You can learn about the conditions for splash resistance from this official support page of Apple.

Take Professional Assistance

If the methods mentioned earlier did not help you, you could seek professional help anytime. There is probably an issue with the hardware, and you are facing the problem. You can get it repaired from the authorized repair center. You may also claim the warranty if you are on the warranty period.

How do I clean the upper speaker on my iPhone?

How do I clear my top phone speaker?

Why is my top speaker muffled on my iPhone?