Home » 2011-2012 Honda Accord Sedan Front Bumper Lip Spoiler PU
Couldn't load pickup availability
Note: If in any case the lip became warped, simply lay it on a flat surface under the sun or use a heat gun gently heat up the warped area. The poly urethane material will restore back to its original shape when heated and stays that way after it cools down. GENERAL INSTALLATION GUIDESTEP 1: Check the item and accessories in the package, and clean the mounting positions with alcohol. STEP 2: Rise the car with lift, hold the front lip and let it align with the front bumper. STEP 3: Put the front lip to the best location and press it tightly with self-adhesive tape. STEP 4: If there are preformed holes on the front lip, hold it and aim at the preformed holes on the bottom of the front lip with electric hand drill and start drilling. STEP 5: Fix the front lip with self-tapping screws through the holes, and ensure the screws are tightened. Use the same way to drill both sides and tighten the screws. Pleae note: 1). This installation instruction for reference only, installation steps and methods vary depending on the specific styles. 2). Professional installation is highly recommended. GENERAL INSTALLATION GUIDESTEP 1: Check the item and accessories in the package, and clean the mounting positions with alcohol. STEP 2: Rise the car with lift, hold the front lip and let it align with the front bumper. STEP 3: Put the front lip to the best location and press it tightly with self-adhesive tape. STEP 4: If there are preformed holes on the front lip, hold it and aim at the preformed holes on the bottom of the front lip with electric hand drill and start drilling. STEP 5: Fix the front lip with self-tapping screws through the holes, and ensure the screws are tightened. Use the same way to drill both sides and tighten the screws. Pleae note: 1). This installation instruction for reference only, installation steps and methods vary depending on the specific styles. 2). Professional installation is highly recommended. |