Show € 42,99 €32,99
Description Specifications DescriptionPulley wheels that fit GX, X01 and XX1 rear derailleurs. Same type that comes with the GX rear derailleur. Specifications
SHAREWe Also Recommend: Joined
Nov 12, 2013 · 1,248 Posts
Discussion Starter · #1 ·
Nov 13, 2019 Hi, I took the derailleur jockey wheels off of my GX Eagle and was careful mark which side was facing outward to start with. However, I was not as diligent enough, and now things don't sound quite right. I noticed that the there are two different types of washers, three with a raised bevel and one a lower one. I have found exploded view on SRAM's
parts catalog, it is still very vague. So, what's the correct way to do this ? Raised on left, flatter right
For Upper wheel - use shorter screw,
flatter washer inboard, raised outboard , looking carefully I see a 'U' on the wheel and that is facing outward
For Lower wheel - use longer screw,
raised washers both sides , looking carefully I see a 'L' on the wheel and that is facing outward
123.4 KB Views: 3,721
173.7 KB Views: 3,727
167.2 KB Views: 3,636
Joined Feb 22, 2009 · 1,390 Posts Joined Nov 12, 2013 · 1,248 Posts
Discussion Starter · #3 · Nov 14, 2019 Found out that what I was doing was correct, a bit of barrel adjustment seems to have done the trick. I did find this video which helped. Joined Mar 3, 2021 · 1 Posts
Man, thank you for posting this. I did the same thing and was having trouble figuring out which direction everything goes.
Joined Apr 8, 2019 · 2 Posts
Hi, I took the derailleur jockey wheels off of my GX Eagle and was careful mark which side was facing outward to start with. However, I was not as diligent enough, and now things don't sound quite right. I noticed that the there are two different types of washers, three with a raised bevel and one a lower one. I have found exploded
view on SRAM's parts catalog, it is still very vague. So, what's the correct way to do this ? Raised on left, flatter right
For Upper wheel - use shorter screw, flatter washer inboard, raised outboard , looking carefully I see a 'U' on the wheel and that is facing outward
For Lower wheel - use longer screw, raised washers both sides , looking carefully I see a 'L' on the wheel and that is facing outward
Thanks. This is really helpful. My X01 2.1 is making noise, and I think it has something to do with the way I installed the jockey wheels after I serviced the bearings. Which way do the shoulders (on the 3 washers that have them) face when installed? Do the nipples face inward, or outward? Joined Jun 9, 2021 · 2 Posts
Thanks. This is really helpful. My X01 2.1 is making noise, and I think it has something to do with the way I installed the jockey wheels after I serviced the bearings. Which way do the shoulders (on the 3 washers that have them) face when installed? Do the nipples face inward, or outward? All “Nipples”
face inward. Both jockey wheels should be flat and smooth on the outside. Do hope jockey wheels fit SRAM Eagle?Are these compatible with SRAM GX Eagle 12 speed ? Nope, these will not be compatible as they are 11t and you will need the 12t Jockey wheels.
Do bigger jockey wheels make a difference?bigger jockey wheels will rotate with fewer rpm for a given cadence, so less wear and tear. bigger jockey wheels mean more teeth (bigger circumference), so less wear and tear.
Do jockey wheels come in different sizes?And there are two different sizes to think about. The most important one is the diameter of the jockey wheel. At ATE, we stock six different diameters. The 35mm, 42mm, 48mm, 48mm serrated, 60mm, and 63mm.
|